Matsushita CF-W5LWEZZ1 2 - Manual (Page 66)

66
9.3.
4.11. Assembly of the Disk Cover
Three bond
Three bond
Safety work
Safety work
The angle and spring are fixed
The angle and spring are fixed
Conduction cloth
Rib root standard
Rib root
standard
Disk cover arm spring
Disk cover arm spring
Disk CV shaft angle
2. The slide is done and the pin
is inserted from the side. 1. The pin is inserted through
the inside diameter of the spring.
Conduction cloth Conduction cloth
It is surely pasted to the plating
part along the shape in spring.
Inserts under
the fingernail
Inserts under
the fingernail
The fingernail
is inserted.
The fingernail
is inserted.
The fingernail
is hooked.
The hanging fingernail is inserted.
Insert in the interior so as not to cause
the space between the hanging fingernail
and disk cover.
Put the fingernail after
confirming the hanging
fingernail has been
surely inserted.
The hanging fingernail is inserted.
Insert in the interior so as not to cause
the space between the hanging fingernail
and disk cover.
The installation order