ICP DAS USA I-7540D - Manual (Page 107)

Please do the following steps to setup the system before you execute this
application program.
Step 1: Setup the VxComm Utility. And the virtual COM port of PC is setting as
following figure. The installing steps about the VxComm Utility tool,
please see section 5.2.
Figure 6-2: VxComm Utility tool
Step 2: Install the PISO-CAN200/400 PCI card. For more information, please
see PISO-CAN user manual.
Step 3: Setup the system of i-7540D by using the i-7540D’s utility tool. Here the
parameters of i-7540D are setting as following figure.
Figure 6-3: i-7540D Utility tool
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 107