ICP DAS USA I-7540D - Manual (Page 79)

4.14 99$P114PBCC…MM…ET
Description: Change the CAN configuration of the i-7540D
¾ Syntax: 99$P114PBCCCCCCCCMMMMMMMMET
99$P114 Command character
P CAN specification
0 = 2.0A
1 = 2.0B
B CAN Baud rate
CCCCCCCC 32 bits Acceptance Code Register (00000000~FFFFFFFF)
MMMMMMMM 32 bits Acceptance Mask Register (00000000~FFFFFFFF)
E Error response or not
0 = Disable
1 = Enable
T Timestamp response or not
0 = Disable
1 = Enable
CAN baud rate list
B Description
0 10K baud rate of CAN
1 20K baud rate of CAN
2 50K baud rate of CAN
3 100K baud rate of CAN
4 125K baud rate of CAN
5 250K baud rate of CAN
6 500K baud rate of CAN
7 800K baud rate of CAN
8 1000K baud rate of CAN
9 User defined
¾ Response:
Valid Command: OK
Invalid command: ERROR
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 79