ICP DAS USA I-7540D - Manual (Page 85)

4.19 99$PWPWLLxxxxx…
Description: Change the Wed password configuration
¾ Syntax: 99$PWPWLLxxxxx…
99$PWPW Command character
LL Web password data length, in hexadecimal format.
xxxxx… Web password data that you want to configure. At most 30
ASCII characters
¾ Response:
Valid Command: OK
Invalid command: ERROR
¾ Example:
Command: 99$PWID0512345
Response: OK
Change the Web password data setting of the 7540D to “12345” and the
7540D responses “OK” command to mean that the configuration of Web
ID data has been changed.
Note:
1. This command can only be accepted by 7540D’s port 10000.
2. Supported by the firmware v1.05 or later.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 85