ICP DAS USA I-7540D - Manual (Page 32)

5. Then the i-7540D configuration window will be brought out. The i-7540D Utility
will show the communication information from the i-7540D module in the
window, as shown in the following figure.
i-7540D’s
CAN Status
Time-Stamp value
response or not
Error code
Response or not
Figure 3-14: Connect to the configuration mode of the i-7540D
6. Choose the “Settings” tab to open the configuration window for the CAN and
the Network status parameters of the i-7540D. Once users have finished
changing the CAN parameter settings, please click the “Setting” button, on the
“CAN Parameters” frame, to store the communication parameters into the
EEPROM on the i-7540D.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 32