ICP DAS USA I-7540D - Manual (Page 115)

Step2: Establish connection as follows:
Labels of CA0910
COM1
RXD1
TXD1
GND
Path 1
Path 2
RX
TX
GND
CA0910 Cable 7520
Male Male
COM4
(Virtual COM)
COM1
(Real COM)
7000 series module
Step 3: Click the COM Port to choose the COM port number, baud rate, and
checksum. For example: COM10, 115200, 19200, 9600 and
No-Checksum. (These settings depend on the settings of 7000 series
module.)
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 115