ICP DAS USA I-7540D - Manual (Page 48)

Application 03: One acts as a server, the other acts as a client.
CAN Bus Pair Connection by using TCP method (port: 10003).
After setting “CAN Bus Pair connection Status” of the two i-7540D and re-start the
system of them, CAN messages between CAN Network 01 and CAN Network 02
can be exchanged by TCP/IP protocol through Ethernet network.
Note:
When setting to act as a TCP server, the “Connect to (Destination IP)” will be
no effective.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 48