ICP DAS USA I-7540D - Manual (Page 97)

Note:
z
Check Duplicated IP option
This option checks whether the IP address is already listed in the server
window (left hand window). It is automatically checked by default. The
following alert will be displayed if an IP address is duplicated.
z
Connect to Server option
This option connects to the i-7540D and retrieves the name of device before
adding it to the server window (left hand window). It is automatically checked
by default. The following alert will be displayed if the Connect to Server
option is not checked before clicking the Add Server button. Choose the
correct i-7540D Model Number and then click the OK button (
Here the
i-7540D model number is 7186E3 ).
z
Timeout (ms) field
This timeout value is used for Connecting, disconnecting and
sending/receiving data in the VxComm Utility, and is used for Connecting and
Disconnecting in the VxComm Driver.
z Command Port field:
By default, the Command/Configuration TCP port is 10000. If you change the
setting of μPAC-7186E, then you must assign the correct one in this field to
let the VxComm Utility and Driver to get access to the device.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 97