ICP DAS USA I-7540D - Manual (Page 80)

¾ Example:
Command: 99$P1140400000000FFFFFFFF00
Response: OK
Set the setting of CAN specification=2.0A, CAN baud rate= 125 Kbps,
acceptance code=00000000, acceptance mask=FFFFFFFF, disable
error response, disable timestamp response into the i-7540D and the
7540D response “OK” command to mean that the configuration of CAN
has been changed.
Note: This command can only be accepted by 7540D’s port 10000
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 80