ICP DAS USA I-7540D - Manual (Page 86)

4.20 99#PPC
Description: Read the CAN bus pair connection configuration. Here support
three parameters, “enable can pair”, “TCP or UDP” and “Server or Client”
¾ Syntax: 99#PPC
99#PPC Command character
¾ Response:
Valid Command: LLABC
Invalid command: ERROR
LL
number of parameters
A Enable CAN bus pair connection flag, 0: Disable, 1: Enable
B Using TCP or UDP connection; 0: TCP, 1: UDP
C Act as a server or client; 0: server, 1: client
¾ Example:
Command: 99#PPC
Response: 03100
Read the CAN bus pair connection configuration of the 7540D, and the
7540D responses that enable can bus pair connection and act as a TCP
server.
Note:
1. This command can only be accepted by 7540D’s port 10000 .
2. Supported by the fi rmware v1.06 or later.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 86