ICP DAS USA I-7540D - Manual (Page 55)

Step 5: If you want to change the 7540D’s COM ports settings, click “ Set ” to
change them. The 7540D’s COM port that you want to configure is
specified by “
Select Port ” combo list. Port 2 means you want to
configure the 7188E’s COM2.
3
2
1
z
7188E: Command-prompt mode program, used to send data to specific
machines using TCP protocol.
Usage:
7188e [-S:IP] [-P:Port]: Connect to a device by using TCP protocol.
*Q: Quit program and disconnect.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 55