ICP DAS USA I-7540D - Manual (Page 78)

¾ Example:
Command: 99$P02050B100
Response: OK
Set the setting of RS-485 baud rate= 115.2Kbps, data bits=8, stop bit=1,
none parity bit into the i-7540D and the 7540D response “OK” command
to mean that the configuration of RS-485 has been changed.
Note: This command can only be accepted by 7540D’s port 10000
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 78