ICP DAS USA I-7540D - Manual (Page 99)

Step 6: Select one of the i-7540D modules, and then click the Server Options
button to configure the server options.
Step 7: Enter the new configuration settings. The new settings will replace any
text already in the Server Options window text boxes. Click the OK
button to save the new settings.
Notes:
z
Keep Alive Time (ms) field:
After connecting to the μPAC-7186E, the VxComm Driver will automatically
and periodically send commands to keep the i-7540D alive. The timer will be
reset after each send/receive command/data success. The Keep-Alive
mechanism will not work until the next timeout. The default setting of
Keep-Alive time is about 7000 ms. Its recommended setting is (i-7540D’s
System Timeout * 1 / 3) or smaller value.
z Connection-Broken (ms) field:
The VxComm Driver will try to re-connect if the connection is broken. When
the client is sending a message to the μPAC-7186E, the Internet (TCP/IP)
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008) 99