Smart Technologies ID422w - Manual (Page 13)

3 | CHAPTER 1 – OVERVIEW
Power
The interactive pen display uses a single 12V DC power supply, which comes with
the unit.
NOTE
The interactive pen display switches to the appropriate voltage automatically.
Power Saving
The SMART Podium ID422w conforms to the Video Electronics Standards
Association (VESA®) power saving guidelines.
When you use the SMART Podium ID422w with a Display Power Management
Signaling (DPMS) compliant computer and video card, the display automatically
complies with the following power saving parameters.
When these power saving functions are in effect, the screen display is darker
than usual.
* epending on the specifications and settings of your computer and video card,
the power light may only change to amber when in standby and suspend modes.
Cables
The interactive pen display comes with four cables:
• DVI-D to DVI-D
• DVI-A to VGA
• USB A-B
• AC power cable
Computer Mode H-sync V-sync Video
Maximum
Power
Consumption
Power Lamp
Power ON Yes Yes Active 54 W Green
Standby mode No Yes Blanked 2 W Green/Amber*
Suspend mode Yes No Blanked 2 W Green/Amber*
Power OFF No No Blanked 1 W Amber