Smart Technologies ID422w User Manual
Page 20
10 |
CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
To connect the interactive
pen display and your
computer video card
1. Turn off your computer.
CAUTION
Do not connect or disconnect the video or power cable if the interactive pen
display or your computer is on. If you do, you can damage the screen and/or
the computer video card.
2. If your computer has only one video connector, disconnect your monitor or add a
second video card.
3. Determine whether your computer has a digital (DVI) connector or an analogue
(VGA) connector and then set the DVI/VGA switch on the connection panel for the
video connection that you are using.
4. Ensuring that you tighten the thumbscrews on the connectors, follow the
instructions below for your video connector.
–
For DVI operation, connect the DVI to DVI video cable to the DVI-I IN port on
the interactive pen display and the DVI-D or DVI-I connector on your
computer’s video card.
–
For VGA operation, connect the VGA to DVI-A video cable to the DVI-I IN port
on the interactive pen display and the VGA connector on your computer’s
video card.
–
For ADC operation, connect one end of the DVI to DVI video cable to the ADC
to DVI adapter, connect the other end of the cable to the DVI-I IN port on the
interactive pen display, and then connect the ADC adapter end to the ADC
connector on your computer’s video card.
NOTE
If you are connecting the unit to an Apple ADC or mini-VGA connection,
you must obtain an appropriate adapter. Adapters are available at retail
outlets.
–
For an Apple mini-VGA connector, connect the VGA end of the analogue
RGB cable to the mini-VGA adapter. Connect the DVI end of the cable to the
DVI-I IN port on the interactive pen display and then connect the mini-VGA
port end to the mini-VGA on your computer’s video card.
To connect the interactive
pen display and an AC
power outlet
1. Connect the power adapter to the interactive pen display, connect the adapter’s
power cable, and then connect the adapter to an AC outlet.
2. Turn on the interactive pen display.
The Power indicator is amber.