Smart Technologies ID422w User Manual
Page 26
16 |
CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
7. Once you have installed SMART Board drivers and SMART Notebook software,
select the SMART Board icon
in the notification area (Windows computers)
or the SMART Board Tools icon in the Dock (Mac computers). Select Check for
Updates and then update to the latest SMART software.
8. Once the software is installed and running, touch the pen to the interactive screen.
The cursor should appear under the tip of the pen. If it does not, you may need to
orientate the screen (see page 23) or read the section entitled Troubleshooting
on page 37.
NOTES
•
If the SMART Board tools do not recognise the interactive pen display,
disconnect and connect the USB connector manually, or use another USB
port on your computer.
•
If the interactive pen display is your secondary monitor, you may need to
enable it. Select Control Panel > Display Properties (Windows computers)
or Apple
menu > System Preferences > Displays (Mac computers).
For more details, read the SMART Notebook software online Help.