Smart Technologies ID422w - Manual (Page 31)

21 | CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
Adjusting the Display
The OSD options enable you to optimize a variety of display settings at the touch of
a button. Make adjustments using the display control buttons located on the upper
left-hand edge of the unit.
To adjust the screen 1. Press the Menu button on the interactive pen display to open the OSD menu.
2. Press the – and + buttons to select the option you want to adjust and then press
the Enter button.
NOTES
–
You can use the interactive pen display’s – and + buttons to scroll.
– The available display options are described on page 19.
The menu for the option you chose appears.
3. Press the – and + buttons to alter the settings for the option.
4. Press the Enter button to save your changes.
5. Repeat steps 2–4 to perform more adjustments.
6. Press the Menu button to exit the OSD menu.
Display Control Buttons Functions
Menu button Press the Menu button to open or exit the OSD menu.
– and +
selection buttons
Use these buttons to select an option and adjust the
option settings. Press the – button to decrease a
selected item value. Press the + button to increase it.
When the option you want to adjust is selected, press
the Enter button, and the current settings and
adjustment sub-menu for that option appears.
NOTE
Some settings may not be available when you are
in DVI mode.
Enter button Press the Enter button to save your changes.
Display Control Buttons