Smart Technologies ID422w - Manual (Page 19)

9 | CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
Installing the Interactive Pen Display
There are three primary stages to the installation process:
• Connecting the interactive pen display and your computer (this page)
• Installing the interactive pen display (page 11)
• Connecting the interactive pen display and your computer using the USB cable
(page 12)
Connecting the Interactive Pen Display and Your Computer
CAUTION
Use only the cables provided with your interactive pen display. Other cables can
damage the interactive pen display.
IMPORTANT
•
Make sure that your video card has a DVI or VGA connector and that you
correctly set the DVI/VGA switch for the video connector you are using.
• Do not attach the USB data cable until instructed to do so.
- +
DVI to DVI
OR
DVI to VGA
Power Adapter
USB to USB