Smart Technologies ID422w - Manual (Page 25)

15 | CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
Installing SMART Board Drivers and
SMART Notebook Software
Your interactive pen display comes with a SMART Product drivers CD and SMART
Notebook software CD, which you can use to install the software you need.
You can also download and install the complete installation of SMART Board drivers
and SMART Notebook software from the
SMART Support website .
NOTE
You will need to use the computer’s keyboard or mouse to perform the
installation,because the pen does not work until the SMART Board tools
are running.
To install SMART Board
drivers and SMART
Notebook software
1. Turn on the computer and the interactive pen display.
2. Close all open applications on the computer.
3. To install SMART Board drivers, insert the SMART Products drivers CD into the
CD drive.
4. For most systems, the CD is self-starting. If the CD does not start automatically:
On Windows computers, select Start > Run, and then type x:\autorun.exe
(where x: is your CD drive).
OR
On Mac computers, open Finder, browse to your CD drive and then double-click
the install file.
5. Follow the on-screen instructions.
IMPORTANT
Select the option to start the SMART Board tools automatically each time you
start your computer. The SMART Board tools must be running for you to have
full functionality and maximum performance when you use the interactive pen
display. You will know that the SMART Board tools are open if you can see
the SMART Board icon
in the notification area (Windows computers) or
the Dock (Mac computers).
6. Repeat steps 3–5 with the SMART Notebook software CD to install SMART
Notebook software.