Smart Technologies ID422w - Manual (Page 28)

18 | CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
Adjusting the Screen
SMART Board drivers adjust your screen automatically. However, you can use the
On-Screen Display (OSD) menu to change the screen.
The Auto-Sync Function
If the interactive screen receives a signal with appropriate vertical and horizontal
frequencies, it automatically synchronizes to the incoming signal. This auto-sync
function adjusts the vertical and horizontal position and the phase and pitch settings.
Auto-sync functions when the vertical frequency is between 56 and 76 Hz and the
horizontal frequency is between 30 and 80 kHz.
NOTES
•
For optimal display quality, set your video card to the SMART Podium
ID422w’s native resolution of 1920 × 1080 pixels (full HD) (see page 17).
• If the SMART Podium ID422w does not automatically synchronize with the
incoming signal, you can use the Auto Adjust (VGA Only) OSD option
(see page 22).
Manual Synchronization
Press the Menu button on the interactive pen display to open the OSD menu and then
use the OSD menu to fine-tune the screen display settings manually.