Smart Technologies ID422w - Manual (Page 6)

iv | – IMPORTANT INFORMATION
• Do not modify the power cord. Handle it carefully and avoid bending it
excessively. Do not place the power cord in an area where it is likely to be
stepped on or pinched by items placed on or against it. If you must run a cable
over the floor, lay it in a flat, straight line and secure it to the floor with tape or
a cable management strip of contrasting colour.
• The interactive pen display comes with a three-pronged, grounding-type
power plug (designed to fit into a grounding-type power outlet). If you can not
insert the plug into a power outlet, contact an electrician to replace the power
outlet. Do not modify the power plug.
• Place the interactive pen display in a location where users will have clear and
direct access to the mains power plug, as they must be able to disconnect
the unit at all times. Always disconnect the interactive pen display before you
install any devices or perform any maintenance.
• If possible, disconnect the interactive pen display before any thunderstorms.
However, do not touch the unit or the unit’s power plug during a thunderstorm,
as there is a risk of electrical shock.
• Disconnect the interactive pen display if you will not use it for an
extended period.
• If the interactive pen display requires replacement parts, use parts that
are specified by SMART Technologies.
• Do not expose the interactive pen display to rain or moisture.