Smart Technologies ID422w - Manual (Page 35)

25 | CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
To remove the interactive
pen display’s stand
1. Place the interactive pen display facedown on a flat surface.
2. Remove the four screws that attach the stand to the interactive pen display and
then remove the stand.
To install the interactive
pen display on the stand
1. Place the interactive pen display facedown on a flat surface.
2. Align the four holes in the stand with the four holes in the back of the interactive
pen display.
3. Insert and tighten the four screws.
4. Place the interactive pen display faceup, with its weight on the stand and the
bottom edge of the interactive pen display.
Other Integrations
Depending on the equipment and your expertise, you may want to integrate the
interactive pen display with other devices. You can easily adapt the interactive pen
display to expand the multimedia capabilities of the equipment in the room.
For example, you can integrate your interactive pen display with a projector and a
SMART Board interactive whiteboard.
NOTE
If you want to use a video cable longer than 15m (50'), you must boost the video
signal with a video distribution amplifier.
Top Edge of
the Stand
Top Edge of
the Interactive
Pen Display
Holes in the Stand