Smart Technologies ID422w - Manual (Page 34)

24 | CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
NOTES
–
To effectively orientate the interactive screen, press an area near each
target and then slide your pen to the centre of each target’s cross hairs
before removing it. Keep your pen at a right angle to the screen.
– You can re-orientate a target by pressing a function button or the
LEFT ARROW key on the keyboard.
– If you want to close the orientation screen before finishing the orientation
procedure, press the ESC key on the keyboard. Otherwise, the
orientation screen closes once you have pressed the last target.
Securing the Interactive Pen Display
You can secure the interactive pen display by attaching a cable (not supplied) to
the security slot that is in the back of the unit and an immovable object.
Removing and Installing the Interactive
Pen Display’s Stand
If you want to, you can remove the interactive pen display from its stand.
CAUTION
•
Set the interactive pen display down carefully to ensure that you do not
damage the buttons.
• Do not place the interactive pen display on a surface that will mark, scratch or
damage the
Security Slot