Smart Technologies ID422w - Manual (Page 4)

ii | – IMPORTANT INFORMATION
CAUTIONS
•
Avoid excessive vibration of the interactive pen display or the tethered pen.
Hitting or dropping the interactive pen display can damage the protective plate
or other components.
• Do not touch the screen with sharp, metallic objects that could scratch the
screen’s coating.
• Use only a damp cloth to clean the screen. Do not apply glass cleaner,
organic solvents (such as alcohol), or even a mild detergent to the screen.
If you use these cleaners, you may damage the screen’s finish or the unit’s
electronics. Using such cleaners also voids the warranty.
• Use only a damp cloth or a cloth dampened with very mild detergent to clean
the unit casing or tethered pen. Do not apply paint thinner, benzene, alcohol
or other solvents to the casing. If you use these cleaners, you may damage
the finish. Using such cleaners also voids the warranty.
• Use only the power adapter that came with the interactive pen display.
Other adapters will not work properly, can damage the interactive pen display
and can create a fire hazard. Using a different power adapter also voids
the warranty.
• Use only the tethered pen that came with the interactive pen display. Tethered
pens or styluses from other products can damage the screen’s protective
coating. In addition, they may not work properly.
• Do not use the interactive pen display in a facility control system or any other
environment that requires extremely high reliability; the interactive pen display
can interfere with or cause other electronic devices to malfunction, or other
devices can interfere with or cause the interactive pen display to malfunction.
Where use is prohibited, turn off the interactive pen display to prevent the
possibility of it interfering with or causing other electronic devices to malfunction.
SMART does not accept any liability for direct or consequential damages.
• If you transport the interactive pen display over a distance, we strongly urge
you to completely repackage it using the original carton. We designed this
packaging with optimal shock and vibration protection. If the original carton is
no longer available, pack all components with as much padding as reasonably
possible to protect the components from excessive vibration or shock. Do not
include loose components in the packaging that could mark, scratch or
otherwise damage the screen during the journey.
• Put the interactive pen display down carefully to ensure that you do not
damage the buttons.
• Do not place the interactive pen display on a surface that will mark, scratch or
damage the screen.