Smart Technologies ID422w - Manual (Page 18)

8 | CHAPTER 2 – INSTALLING THE SMART PODIUM ID422w
To alleviate glare, you can use the attached tilt stand to angle the interactive pen
display. Alternatively, use a tilt stand that conforms to the standard sizes set by VESA.
When installing a VESA compliant stand, use M4 screws (4mm or 1/16" wide with a
0.7mm or 1/32" pitch) that are no longer than 15mm (1/4").
Setting Up Your Work Area
To minimise fatigue, organise your work area so that you can work comfortably.
Position your interactive pen display, the pen and your keyboard for easy access
without unnecessary reaching. You should be able to comfortably view the pen display
and any other displays with a minimum of eye strain.
Because the interactive pen display surface will be a little higher than your desk, you
can adjust the height of your desk or chair to ensure comfortable use of the device.
You can also mount the SMART Podium ID422w onto articulated arms or other
third-party stands meeting the VESA 100 specification for display stands.
Changing the Angle of the Interactive Pen Display
You can adjust the stand to change the angle of the interactive pen display.
NOTE
For information on how to remove or install the stand, see page 24.
To change the angle of the
interactive pen display
1. Hold the interactive pen display to support its weight whilst you adjust the stand.
2. Push the stand’s locking mechanism towards the top of the interactive pen
display, adjust the angle of the stand and then release the locking mechanism.
Locking
Mechanism