3 - turning on the system, 3turning on the system – Lennox Hearth G8 User Manual
Page 12
Advertising
54-0198
6
TracVision G8 Owner’s Manual - Guide to Operation
3
Turning On the System
The TracVision G8 system is easy to use. Antenna unit
initialization and satellite acquisition are completely automatic.
To use the TracVision G8 system, follow the steps below.
1. Turn on the IRD and the television. (
Refer to your
IRD user’s manual for complete operating
instructions for the IRD.)
2. Apply power to the TracVision G8 antenna.
3. Minimize turning the vessel for two minutes after
turning on the antenna to allow the antenna gyro to
initialize properly.
To minimize the time it takes the
antenna to acquire the satellite, do
not change the channel during the
startup process or cable unwrap.
Advertising