Lennox Hearth G8 - Manual (Page 30)

6. Remove the eight screws securing the radome to
the baseplate. Carefully lift the radome straight up
until clear of the antenna assembly and set it aside
in a safe place. If you bring the radome topside, secure
it with a lanyard to prevent it from falling overboard.
7. Remove the tie-wrap securing the MCU/kitpack
box to the antenna baseplate. Remove the box.
8. Unfasten the tie-wrap securing the antenna frame
to the sensor bracket (release the tab using a flat-head
screwdriver). Save the tie-wrap in case the antenna
needs to be reshipped someday.
9. Inspect the antenna unit for any signs of shipping
damage.
Installation
54-0198 27
Figure 2-4
MCU/Kitpack Box
Figure 2-5
Antenna Frame Shipping Restraint
Tie-wrap
Tie-wrap
Sensor
Bracket
Frame