Lennox Hearth G8 - Manual (Page 57)

54-0198 54
TracVision G8 Owner’s Manual - Guide to Technical Information
2.9 Changing Geographic Location
If you move to a different geographic area, you will need to
modify your TracVision G8 system to receive satellite TV signals
in the new location. To begin receiving satellite signals in the new
area, perform the following steps.
Swap LNB/Feed Tube Assembly
To receive the proper satellite signals in the new geographic
location, your TracVision antenna must be equipped with the
appropriate LNB/feed tube assembly for that location:
Moving from: Moving to: Order from KVH:
North America Latin America Latin American LNB
North America Europe European LNB/feed tube
Latin America
Latin America North America North American LNB
Europe North America North American LNB/feed tube
Europe Latin America Latin American LNB/feed tube
Table 2-13 lists the part numbers for ordering these various
options.
Part Name Part Number
North American LNB 02-0870
North American LNB/feed tube assembly 02-1282-01
Latin American LNB 02-0870-01
Latin American LNB/feed tube assembly 02-1282-03
European LNB/feed tube assembly* 02-1282-04
* The European LNB/feed tube assembly includes a skew control
mechanism that allows the antenna to automatically adjust skew for
changes in region and satellite service.
Table 2-13
LNB and LNB/Feed Tube Assembly
Part Numbers
Table 2-12
Required LNB or LNB/Feed Tube
Assembly for New Geographic
Location