Lennox Hearth G8 User Manual
Page 53
54-0198
50
TracVision G8 Owner’s Manual - Guide to Technical Information
An Example of Configuring a User-defined Satellite (N. America)
The following is an example of configuring the fictional
YOURSAT 101 as the USER1 configured satellite. Prior to
configuring this satellite or any others, be certain to get the most
up-to-date information from one of the sources previously
discussed.
YOURSAT 101 at 122 West, DVB Decoder, Circular Polarization LNB
Right
Frequency
12.225 GHz
Symbol Rate
20000
FEC Code
5/6
Network ID
4100(dec) = 0x1004
Left
Frequency
12.456 GHz
Symbol Rate
20000
FEC Code
5/6
Network ID
4100(dec) = 0x1004
Based on this information, the data entered via the PC would
look like this, assuming that YOURSAT 101 would be Satellite A:
SATCONFIG,USER1,122,W,3,C
@DEBUGON
@SATCONFIG,A,98,12225,20000,56,0x1004,R,U,3
@SATCONFIG,A,98,12456,20000,56,0x1004,L,U,3
@SAVE,A
ZAP
To install and start tracking the USER1 satellite, the following
additional data would be entered:
HALT
SATINSTALL USER1,NONE
@L,A
ZAP
Table 2-10
Sample Satellite Configuration
Data (North America)