Lennox Hearth G8 - Manual (Page 72)

Installing a New Satellite Pair
TracVision G8 permits two satellite services (Satellites A and B) to
be installed simultaneously. There is also an option for
NONE on
Satellite B, permitting single satellite operation.
Using the MCU Interface
54-0198 71
Proceed to "Setting Latitude
and Longitude
Install Satellite?
Enter Next Return
Install A <SAT NAME>
Yes Next Cancel
Install B <SAT NAME>
Yes Next Cancel
Installing sats
Please wait
<SAT Name> and
<SAT NAME> installed
Selecting NEXT will cycle
the display through all
available satellites.
Selecting NEXT will cycle
the display through all
satellites that can be paired
with the selection for
Satellite A. If no satellite is
available for a pair or you
wish a single satellite
configuration, select NONE.
Refer to Tables 3-1 and
3-2 for available North
American and European
satellite pairs.
Restart antenna?
Yes No
Restart
Antenna
System
Figure 3-16
Install Satellite Pair Process