Lennox Hearth G8 - Manual (Page 87)

Type of Multiswitch Used
An active (not passive) multiswitch must always be used to
connect the TracVision G8 system to multiple IRDs. Refer to
Section 2.3, “Connecting the IRD(s),” on page 31 for directions on
proper multiswitch/multiple IRD cabling.
4.3 IRD Troubleshooting
The IRD that was provided with your satellite television service
may also be the cause of less-than-ideal operation. First check the
IRD’s configuration to ensure it is set up for the desired
programming. In the case of a faulty IRD, refer to your IRD user
manual for service and warranty information. If the IRD is both
configured properly and fully functional, contact your local KVH
dealer or service center for assistance.
4.4 Antenna Gyro and LNB Faults
Section 5, “Maintenance,” provides detailed instructions for
authorized service personnel who may be required to replace one
of the antenna gyros or the LNB.
Troubleshooting
54-0198 87