Lennox Hearth G8 - Manual (Page 71)

Restarting the Antenna
After resetting satellite parameters, it is necessary to restart the
antenna before the new settings take effect.
Turning Sleep Mode On/Off
Sleep Mode turns off conical scan tracking if the antenna holds
the same position for one minute. As soon as the vessel moves,
the system will automatically begin tracking the satellite again.
Turning Instant On Mode On/Off
Instant On allows the antenna to immediately receive a TV signal
if the vessel has not moved since the antenna was last shut off. If
the vessel moves after acquiring the satellite via Instant On, the
antenna will undergo its standard initialization process, resulting
in a brief interruption of the TV signal.
54-0198 70
TracVision G8 Owner’s Manual - Guide to Technical Information
Figure 3-13
Restart Antenna Menu
Restart antenna?
Yes Next Return
Antenna Restarted
Proceed to "Turning Sleep Mode
On/Off"
This screen is displayed for 3 seconds
before returning to startup sequence
and main data display
Set sleep On/Off?
Yes Next Return
sLEEP mode: ON
On Return Off The antenna communication setting will
be displayed based on current
selection. ON activates Sleep Mode.
Pushing the ON and OFF buttons will
change the selected setting.
Proceed to "Turning Instant On
Mode On/Off"
Set instant On/Off?
Yes Next Return
iNSTANT mode: ON
On Return Off The antenna communication setting will
be displayed based on current selection.
ON activates Instant On Mode. Pushing
the ON and OFF buttons will change the
selected setting.
Proceed to "Installing a New
Satellite Pair"
Figure 3-14
Sleep Mode Menu
Figure 3-15
Instant On Mode Menu
The factory default setting for Sleep
Mode is ON.
The factory default setting for
Instant On Mode is OFF.