Promise Technology VTrak 15110 - Manual (Page 107)

Chapter 4: Management with WebPAM PRO
99
Statistics
The SCSI Management–Statistics tab displays a tally of Input/Output operations
and amount of data transactions. These figures are for informational purposes
only.
1. Click the Subsystem icon.
2. Click on the VTrak icon.
3. Click on the SCSI Management icon.
4. Click on the Statistics tab.
The statistics are displayed in this order:
•
Count (number) of Read input/output operations
• Count (number) of Write input/output operations
• Data volume of Read transactions in Megabytes
• Data volume of Write transactions in Megabytes
Network Management
Ethernet
The Network Management–Ethernet tab displays the current Network settings.
These settings pertain to VTrak's Management Port.
To make settings, click on the Port1 link or the Settings tab.
To access the Network Management–Ethernet tab:
1. Click the Subsystem icon.
2. Click on the VTrak icon.
3. Click on the Network Management icon.
Note
The quantity and ID number of Target IDs you select depends in
part upon how many logical drives you plan to create, how your
Host PC and RAID subsystem are connected, and how many
addresses are on the SCSI bus.
• Ethernet (below) • Settings (page 100)