Settings, Service management, Service – Promise Technology VTrak 15110 User Manual
Page 108
VTrak 15110 User Manual
100
4.
Click on the Port1 link or the Settings tab.
Settings
The Network Management–Settings tab enables you to make network settings
for VTrak's Management Port.
To make settings:
1.
Click the Subsystem
icon.
2.
Click on the VTrak
icon.
3.
Click on the Network Management
icon.
4.
Click on the Port1 link or the Settings tab.
5.
Enter the Management Port IP address.
6.
Enter the TFTP Server IP address.
7.
Enter the Subnet Mask.
8.
Enter the Gateway IP address.
9.
Click the Submit button when you are done.
Service Management
Service
The Service Management–Service tab displays the services running with
WebPAM PRO and their startup types and current status.
1.
Click the Subsystem
icon.
Notes
•
For WebPAM PRO to work, you must have the correct
Managment Port IP address and Subnet Mask.
•
The TFTP Server is used to update VTrak's firmware under
Software Management.
•
The Gateway IP address is required if your WebPAM PRO
network connection includes a gateway.
•
Service (below)
•
•