Promise Technology VTrak 15110 - Manual (Page 19)

Chapter 2: Installation
11
To remove a Drive Carrier from the VTrak, pull the Drive Carrier Latch Handle
and remove an unused Drive Carrier (see Figure 3).
Figure 4. Drive Carrier mounting holes
Note that the Drive Carrier has several mounting holes (above). Those marked
with a triangle are for disk drives.
Caution
Be sure to install the counter-sink screws supplied with the VTrak.
Use of other types of screws can damage the adjacent drives.
PATA-to-SATA
Adapter
SATA Drive Mounting Holes
PATA Drive
Mounting Holes