Promise Technology VTrak 15110 - Manual (Page 124)

VTrak 15110 User Manual
116
9. If you accept these parameters, proceed to the next step.
If you do NOT accept these parameters, review and modify your selections
in the previous steps.
10. When you are done, click the Submit button.
The new disk array appears in the Disk Array List on the Information tab.
Proceed to Create Logical Drive (page 120).
Delete Disk Array
To delete a disk array, do the following:
1. Click on the Subsystem icon in Tree View.
2. Click on the VTrak icon.
3. Click on the Disk Arrays icon.
4. Click on the Delete tab.
5. Check the box to the left of the disk array you want to delete.
6. Click the Submit button.
7. Click the OK in the confirmation box.
Caution
When you delete a disk array, you delete all the logical drives and
the data they contain. Back up all important data before deleting a
disk array.