Promise Technology VTrak 15110 - Manual (Page 121)

Chapter 4: Management with WebPAM PRO
113
To create a new disk array:
1. Check the boxes to select any one or combination of the following:
•
Redundancy – The array will remain available if a physical drive fails
• Capacity – The greatest possible amount of data capacity
• Performance – The highest possible read/write speed
• Spare Drive – A hot spare drive
2. In the Number of Logical Drives field, type the number of logical drives you
want to make from this disk array.
The maximum possible number of logical drives appears to the right of this
field.
3. From the Application Type menu, select an application that best describes
your intended use for this disk array: File Server
•
Video Stream
• Transaction Data
• Transaction Log