Promise Technology VTrak 15110 - Manual (Page 28)

VTrak 15110 User Manual
20
Configuration 4: Two VTraks, one Host PC, one SCSI HBA
card (daisy chain)
Do the following when daisy-chaining VTraks:
1.
Use a 68-pin VHDCI cable to attach each VTrak array to the SCSI chain.
You can connect up to eight (8) VTraks on the same SCSI chain.
2. Set a different SCSI Target ID for each VTrak.
For example, a daisy chain of six VTraks could have these assignments:
VTrak 1 . . . .Target ID 1
VTrak 2 . . . .Target ID 2
VTrak 3 . . . .Target ID 3
VTrak 4 . . . .Target ID 4
VTrak 5 . . . .Target ID 5
VTrak 6 . . . .Target ID 6
See page 98 (WebPAM PRO) or page 180 (CLU) for instructions how to set
SCSI Target IDs.
3. Install a SCSI terminator on the last VTrak in the chain.
Host PC
SCSI Cable
SCSI
Terminator
VTrak 1
VTrak 2
SCSI HBA Card