Promise Technology VTrak 15110 - Manual (Page 115)

Chapter 4: Management with WebPAM PRO
107
2. Click on the VTrak icon.
3. Click on the Enclosures icon.
4. Click on the Enclosure icon.
5. Click on the Buzzer tab.
6. Click the dropdown menu on the Buzzer tab and select Settings.
The buzzer settings tab appears.
•
Check the Enable box to enable the buzzer. Uncheck the box to disable.
• Check the Silence box in to stop the Buzzer for the current event only.
7. Click the Submit button when you are done.
Physical Drive List
The Physical Drives–Information tab gives a description and reports the status of
the hard disk drives in this enclosure. To access the physical drives list:
1. Click the Subsystem icon.
2. Click on the VTrak icon.
3. Click on the Enclosures icon.
4. Click on the Enclosure icon.
5. Click on the Physical Drives icon.
Enclosure Front View
The Enclosure Front View shows the enclosure locations of the physical drives.
Move your cursor over the physical drive in the list and the location is highlighted
in the diagram.