Promise Technology VTrak 15110 - Manual (Page 97)

Chapter 4: Management with WebPAM PRO
89
3. Set the Email parameters:
4. Click the Submit button when you are done.
Firmware Update
This tab is used to update the firmware on VTrak subsystems. See Firmware
Update on page 190 for instructions on how to update VTrak’s firmware.
1. Click the Software Management icon under Administration Tools.
2. Click the Firmware Update tab.
ESMTP Enable Check the box to enable eSMTP.
ESMTP User Name Enter a user name for yourself.
ESMTP Password
Enter a password for yourself.
Email Server Specifies the name of the email server on your
network.
Email Subject Specifies the “subject line” on email event notification
messages.
Event Frame
Refresh Time Specifies the time interval between refreshes of the
Event Frame.