Promise Technology VTrak 15110 User Manual
Page 60
VTrak 15110 User Manual
52
1.
Enter a name for the disk array in the field provided.
2.
Check the box to enable initialization, if desired.
If you checked the initialization box, select the type of initialization from the
dropdown menu.
•
Quick – Erases the reserve sectors of the physical drives being added
to the disk array.
•
Full – Erases all sectors of the physical drives being added to the disk
array.
3.
Highlight physical drives you want in the disk array from the Available list and
press the >> button to move them to the Selected list.
You can also double-click them to move them.
4.
When you are done, click the Next button.
5.
Choose a RAID level from the dropdown menu.
The choice of RAID levels depends on the number of physical drives you
selected.
6.
Specify a Capacity and the unit of measure (MB, GB, TB).
This value will be the data capacity of the first logical drive in your new disk
array. If you specify less than disk array's maximum capacity, the remainder
will be available for additional logical drives which you can create later.
7.
Specify a Stripe size from the dropdown menu.
4, 8, 16, 32 and 64 KB are available, 64 KB is the default.
8.
Click the Next button.
The Creation Summary lists the disk array information you specified.