Panasonic AG-HPG10P - Manual (Page 21)

21
Preparations
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
2
Press [MODE] to display the thumbnail
display off screen.
3
Press [MENU].
Basic operations on the setting menus. (page
70)
4
At the “TIME ZONE” item on the setting
menu “OTHER FUNCTION” screen, set the
time difference from Greenwich Mean Time
(GMT) using [STOP] and [PLAY] (page 78).
If the unit is going to be used in Japan, set to 9
hours ahead (factory mode) of GMT.
OTHER FUNCTIONS
PUSH MENU TO RETURN
PC MODE
BEEP SOUND
CLOCK SET
TIME ZONE
POWER SAVE
LANGUAGE
SYSTEM FREQ
USER FILE
USB HOST
OFF
- - - -
+ 9:00
OFF
ENGLISH
59.94Hz
- - - -
5
Select “YES” at the “CLOCK SET” item
on the setting menu “OTHER FUNCTION”
screen.
OTHER FUNCTIONS
PUSH MENU TO RETURN
PC MODE
BEEP SOUND
CLOCK SET
TIME ZONE
POWER SAVE
LANGUAGE
SYSTEM FREQ
USER FILE
USB HOST
OFF
- - - -
OFF
ENGLISH
59.94Hz
- - - -
YES
6
Press [FF] or [REW] to set “YEAR” to
“2007”.
CLOCK SET
PUSH MENU TO RETURN
YEAR
DAY
MONTH
HOUR
MIN
APR
7
24
13
2007
+/ /
/
-
SEL
: PUSH
: PUSH
Any year from 2000 to 2030 can be set.
7
Press [STOP] to move the setting item to
“MONTH”.
CLOCK SET
PUSH MENU TO RETURN
YEAR
DAY
MONTH
HOUR
MIN
APR
7
24
13
2007
+/ /
/
-
SEL
: PUSH
: PUSH
8
Press [FF] or [REW] to set “MONTH” to
“MAY”.
CLOCK SET
PUSH MENU TO RETURN
YEAR
DAY
MONTH
HOUR
MIN
MAY
7
24
13
2007
+/ /
/
-
SEL
: PUSH
: PUSH
9
Use the same method as in steps 4 and 5 to
set “DAY”, “HOUR” and “MIN”.
• The 24-hour clock system is used by this unit.
CLOCK SET
PUSH MENU TO RETURN
YEAR
DAY
MONTH
HOUR
MIN
MAY
20
25
17
2007
+/ /
/
-
SEL
: PUSH
: PUSH
10
Press [MENU] 3 times to release the menu
mode.
• An error will occur in the time so check that
the time is correct before shooting.
• If the unit is going to be used overseas, do
not set the “CLOCK SET” item to the current
time but input the time difference from GMT
using the “TIME ZONE” item.
Setting the calendar
The “CLOCK SET” value is recorded on the data content (clips), and it affects the sequence in which the
thumbnails are played back. Before recording, be absolutely sure to check the “CLOCK SET” and “TIME
ZONE” settings, and set them if necessary. Described below is the procedure for setting the clock to 5:20
PM on May 25, 2007.