Panasonic AG-HPG10P - Manual (Page 41)

41
Playback
1
Display the thumbnail display screen.
2
Press [MENU].
3
Using [STOP], [PLAY] and [STILL], select
“PROPERTY” – “DEVICES” – “SD CARD”,
and press [STILL].
The following information is displayed.
SD STANDARD: Whether the SD memory
card has been formatted
in compliance with the SD
standard is displayed.
SUPPORTED: The card format
complies with the SD standard.
NOT SUPPORTED: The card
format does not comply with the
SD standard.
USED: Used memory [bytes]
BLANK: Free memory [bytes]
TOTAL: Total memory [bytes]
NUMBER OF
CLIPS: Number of clips contained on
the SD memory card when the
clips were copied onto an SD
memory card with a proxy or P2
camera-recorder
PROTECT: Write – protect status
• Proxy recording is not possible with this unit.
4
Press “OK” ([STILL]).
5
Press [MENU] to exit the procedure.
Displaying the SD memory card information
You can display the usage statuses of the SD memory cards on the screen, and check them.