Panasonic AG-HPG10P - Manual (Page 29)

29
Playback
Menu configuration of thumbnail display screen
1 Display statuses
The types of information which are displayed on
the screen are displayed as follows.
ALL: All clips
SAME FORMAT: Clip whose format is the
same as the system format
SELECT: Clip selected by the SET
button
MARKER: Clip to which the shot mark
has been added
TEXT MEMO: Clip with text memo data
SLOT n: Clip on the P2 card in slot
“n”
PROPERTY: Detailed clip information
P2/REMAIN: Media information
(remaining memory)
P2/USED: Media information (used
memory)
2 P2 card slot numbers and hard drive
statuses
The statuses of for the P2 cards and USB hard
drive are displayed as follows.
1 2
(White)
The numbers of the P2 card slots
where P2 cards have been inserted
are displayed in white.
1 2
(Yellow)
The number of the P2 card slot ,
which contains a P2 card with a clip
that has its cursor position recorded,
is displayed in yellow. When a single
clip has been recorded on a multiple
number of P2 cards, all the slot
numbers of the cards on which the
clip is recorded will be displayed.
(Gray)
When a mode other than the USB
HOST mode is established or when
the USB HOST mode is established
but the hard drive is not connected,
this status is displayed in gray.
(White)
When the USB HOST mode is
established and the hard drive can
be used, this status is displayed in
white.
(Yellow)
When the USB HOST mode
is established and the clips on
the hard drive are displayed as
thumbnails, this status is displayed
in yellow.
(Red)
When the USB HOST mode is
established and the hard drive is
in the data copy enable status, this
status is displayed in red.
1 2 P2 HDD
THUMBNAIL OPERATION PROPERTY
ALL CLIP
SAME FORMAT CLIPS
SELECTED CLIPS
MARKED CLIPS
TEXT MEMO CLIPS
SLOT CLIPS
SETUP
EXIT DELETE
FORMAT
REPAIR CLIP
EXCH
THUMBNAIL
RE-
CONNECTION
COPY
EXIT
CLIP PROPERTY
CARD STATUS
DEVICES
PROPERTY SETUP
SYSTEM INFO
EXIT
HDD
EXPORT
EXPLORE
FORMAT
SETUP
EXIT