Other, Concerning p2 cards – Panasonic AG-HPG10P User Manual

Page 25

Advertising
background image

25

Preparations

Model number

Capacity

DVCPRO/DV

Audio 2CH

DVCPRO50

Audio 4CH

DVCPRO HD

1

AJ-P2C004HG

4 GB

Approx. 16 minutes

Approx. 8 minutes

Approx. 4 minutes

AJ-P2C008HG

8 GB

Approx. 32 minutes

Approx. 16 minutes

Approx. 8 minutes

AJ-P2C016RG

16 GB

Approx. 64 minutes

Approx. 32 minutes

Approx. 16 minutes

• AJ-P2C002SG (2 GB) cards cannot be used.
• The memory needed for management and other purposes is included in the memory figure displayed, so

the amount of memory you can use for recording is less than what is displayed.

• Concerning dividing the clips recorded on P2 cards
If, when a P2 card with a memory capacity of 8 GB or more is used in this unit, the continuous recording

time for a single session exceeds the time shown in the table below, the recording will automatically
continue as another clip. Furthermore, when performing thumbnail operations (such as display, delete,
repair or copy) for clips using the P2 device, these operations can be performed with all the clips treated
as a single clip. The clips may be displayed as separate clips by non-linear editing software and PCs.

• When any other kind of card is used, you may need to update the driver installed in the unit. (Page 86)

P2 card recording durations

Concerning P2 cards

Using the USER buttons

One of ten different functions can be allocated to
each of USER1, 2 and 3 buttons.

USER1: SYS FORMAT
USER2: SHOT MARK
USER3: TEXT MEMO

For details, refer to the USER1-3 items (page 74)
on the setting menu “SW MODE” screen.
• The function allocated to [USER] is displayed

when [MENU] and [MODE] are pressed together
on the thumbnail display off screen.

Charging the internal battery

The date (year/month/day) and time are stored in
the memory by the internal battery. When the

display has appeared on the LCD monitor screen,
it means that the internal battery charge is low.
Follow the steps below to charge the battery. After
the battery has been fully charged, set the date
and time.

1

Connect the AC adapter to the unit.

Keep the unit’s power turned off.

2

Maintain this condition for about 4 hours.

The internal battery will now be charged.
After charging, check the TC and menu.

If

appears even after the internal battery has

been charged, the battery must be replaced. Ask
your dealer for another battery.

Recording format

Recording time

DVCPRO HD∗

1

Approx. 5 minutes

DVCPRO50

Approx. 10 minutes

DVCPRO/DV

Approx. 20 minutes

∗1 720P/30PN and 720P/24PN are excluded from the

DVCPRO HD formats.

Other

Advertising