Panasonic AG-HPG10P - Manual (Page 8)

8
How to use the unit
Housed in a compact cabinet which can be battery-powered, this Portable Memory Card Recorder comes
with two P2 card slots, a 3.5-inch LCD monitor, USB 2.0, IEEE1394, component signal, composite signal
and many other input/output signal connectors, and it can be easily operated to play back the data
content which has been shot by a P2 camera recorder. It is also capable of backup recording and file
management, and it supports P2 field recording.
Playing back data content
1
Playing back the data on the unit’s LCD
monitor (page 42)
Data content (both pictures and sound) which has been shot on P2 cards using a P2 camera recorder can
be played back on the spot.
2
Outputting the data to the external monitor
for playback (page 46)
The data content (both pictures and sound) which has been shot on P2 cards can be output to the external
monitor, and played back.
Recording data on P2 cards
3
Simultaneous recording of data onto P2
cards (page 48)
When connected to a P2 camera recorder, the unit enables the data content being shot to be monitored on
the unit’s display and the same data to be simultaneously recorded onto a P2 card.
The unit’s recording start and stop operations can be performed from the camera recorder.
P2 camera recorder
AG-HPG10
AG-HPG1 0
P2 card
AG-HPG10 (this unit)
HD/SD-SDI output
Video output/
component output
AG-HPG1 0
1394 cable
P2 camera recorder
P2 card
External monitor
AG-HPG10 (this unit)
AG-HPG10 (this unit)
P2 card