Panasonic AG-HPG10P - Manual (Page 63)

63
Displays
50M:
Recording and playback in the 480i, 576i
DVCPRO50 format
25M:
Recording and playback in the 480i, 576i
DVCPRO25 format
DV:
Recording and playback in the 480i, 576i DV
format
4 System frequency displays
60:
59.94 Hz
50:
50 Hz
5 1394 TC display
This appears when ON has been selected as
the 1394 IN PRESET item setting on the setting
menu RECORDING SETUP screen.
6 Squeeze recording display
This appears when images which were
squeeze-recorded in the 480i/576i format are
played back.
7 Date and time display
The mm/dd/yyyy, hh:mm:ss format (month/day/
year/hours/minutes/seconds) is used to display
the date and time.
8 Playback frame rate display
24P, 24PA, 60P, 30P, 50P, 25P
• The following frame rates are displayed with
native recordings shot by the AG-HVX200,
for instance. The “Variable rate: recording
rate” display appears during the playback of
variable frame recordings.
• The frame rate is not displayed during the
playback of 60i or 50i content.
9 Audio level meter display
The meter indicates the levels of the signals
which are output to the CH1 and CH2 audio
output (AUDIO OUT) connectors (RCA
connectors).
10 USB HOST display
This display appears while the USB HOST
mode is established.
11 Text memo, shot mark displays
These displays appear for about 3 seconds
when [USER], to which a shot mark or a text
memo has been assigned ahead of time, is
pressed and the shot mark or text memo is
recorded.
MARK ON :
When a shot mark has been added
MARK OFF :
When a shot mark has been deleted
TEXT MEMO :
When a text memo has been added
INVALID :
When deletion is not possible
12 Information display
The following information is displayed
depending on the circumstances.
• Warning displays, error displays
• Displays for mode switching using [USER] (V
OUT OSD, AUDIO OUT, SLOT SEL)
• The function assigned to [USER] is displayed
while [MODE] is pressed.
13 Operation status displays
REC :
Recording
PAUSE : Recording standby
: Playback pause
REPEAT :
Repeat playback
( ) :
Rapid forward playback (rapid reverse
playback)
( ) :
Frame feed playback (reverse frame feed
playback)
x /x (x /x ):
Variable-speed playback (reverse variable-
speed playback)
CLIP (CLIP ) :
Clip feed (reverse clip feed)
14 Repeat playback setting display
This appears when “ON” has been selected for
the “REPEAT” item setting on the setting menu
“PLAYBACK FUNCTION” screen.
15 Remaining battery charge display
As the remaining charge drops, the display
changes in the following sequence:
and .
When the charge is depleted, ( )
blinks.
(While the AC adapter is being used, a display
other than
may appear: this is normal
and is not a sign of trouble.)