Panasonic AG-HPG10P - Manual (Page 89)

89
For your
reference
Concerning the use of memory cards
In this unit, use SD memory cards which comply with the SD standard or SDHC standard.
If miniSD or miniSDHC cards are going to be used in this unit, be absolutely sure to install the special
adapter prior to using them. (The unit and cards will not operate properly if only the adapter is installed on
the unit. You must insert the memory card into the adapter for use.)
SD memory cards with the following memory sizes can be used within this unit.
It is recommended that the SD and SDHC memory cards or the miniSD and miniSDHC cards made by
Panasonic be used.
For the latest information on the unit and the memory cards which can be used by the unit, access the P2
support page on the web site below.
http://panasonic.biz/sav/
• SDHC is a new standard for memory cards with memory sizes of 2GB or more which was formulated in
2006 by the SD Association.
• The SD card logo is a registered trademark.
• MMC (MultiMediaCard) is a registered trademark of Infineon Technologies AG.
Cards that you can use
Cards that you cannot
use
• SD TM memory cards (including miniSD TM cards)
• SDHC TM memory cards (including miniSDHC TM cards)
All memory cards except the ones
shown on the left
• MultiMediaCard
SD (8 MB to 2 GB)
8 MB 16 MB 32 MB 64 MB 128 MB
256 MB 512 MB 1 GB 2 GB
SDHC (4 GB only)
4 GB