Panasonic AG-HPG10P - Manual (Page 74)

List of setting menus (continued)
74
The underlined settings are the factory mode settings.
SW MODE screen
Item Description of settings
USER1 This is used to set which function is to be assigned to the USER1 button.
SYS FORMAT:
System format (page 72)
SD MODE :
SD mode (page 72)
SHOT MARK :
A shot mark is recorded on the clip. (Page 39)
TEXT MEMO :
A text memo is recorded. (Page 38)
LCD BL :
LCD backlight (page 76)
V OUT OSD :
Video output on-screen display (page 76)
AUDIO OUT :
Audio output (page 75)
SLOT SEL :
P2 card slot selection (page 49)
LCD RVS :
LCD reverse (page 76)
WFM :
Waveform monitor (page 49)
USER2 This is used to set which function is to be assigned to the USER2 button.
The settings of this item are the same as the USER1 item settings.
SHOT MARK
USER3 This is used to set which function is to be assigned to the USER3 button.
The settings of this item are the same as the USER1 item settings.
TEXT MEMO