Recording, Recording data on p2 cards, 1394 input recording – Panasonic AG-HPG10P User Manual
Page 48
48
Recording data on P2 cards
1394 input recording
You can connect a digital video component equipped with a 1394 connector, and digitally record video
signals, audio signals or time codes, etc. on the unit.
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
The thumbnail screen appears.
2
Press [MODE].
The thumbnail display off screen appears.
106 mn
1
2
HD720P
60
1
C
H
2
C
H
3
Press [MENU].
4
Using [STOP], [PLAY] and [STILL], select
the “RECORDING SETUP” – “SYS FORMAT”
setting, press [STILL], and ensure that the
1394 video input image format and the unit’s
recording format are the same.
For details, refer to setting menu “RECORDING
SETUP” screen (page 72).
AG-HPG10
5
As in step 4, after selecting “RECORDING
SETUP” using [STOP] and [STILL], set the
time code, user’s bit and so on.
For details, refer to setting menu “RECORDING
SETUP” screen (page 72).
6
Press the two [REC] buttons together.
Recording now starts.
• To stop the recording, press [STOP].
• While recording is underway, text memos or
shot marks assigned to [USER] (page 74) can
be inserted.
1394 cable
(optional accessory)
Unit
Digital
component
IEEE1394 input/output
connector